Fleet & Enterprise
Visual Lifecycle Management
The UK's dedicated engineering authority for mission-critical projection. We provide component-level repair, preventative maintenance, and asset recovery for Cinema, Simulation, Rental, and Education fleets.
Beyond "Box Swapping"
In the high-stakes environments of enterprise, cinema, and simulation, downtime is not an option—and neither is the excessive cost of premature hardware replacement. Manufacturers often push for expensive module swaps or complete unit replacements when a single sub-system fails.
Wells Electronics takes a granular approach. We operate as a forensic engineering laboratory, stripping projectors down to the chassis to identify the root cause of failure. Whether it is a degraded polariser in a flight simulator, a failing ballast in a digital cinema projector, or a thermal sensor error in a university lecture hall, we repair the component, not just the unit. This approach extends asset life, reduces electronic waste, and typically saves our clients 60-70% compared to OEM replacement costs.
Engineering by Sector
Enterprise & Education
High-Volume Fleet Ops
Supporting Universities, NHS Trusts, and Corporate HQs. We manage fleets of Epson, NEC, Panasonic, and Sony laser projectors, ensuring uniform brightness across hundreds of rooms.
Explore Education ServicesCommon Failure Modes
- Optical Block Degradation: Yellow/Blue discolouration in LCD panels due to heat stress.
- Auto-Iris Failure: Grinding noises or 'Cinema Filter' errors in Epson chassis.
- HDMI Port Damage: Physical stress fractures on mainboard inputs from cable strain.
- Thermal Shutdowns: Dust clogging in air intakes triggering temp sensors.
Service Protocols
- Purchase Order (PO) Account: 30-day payment terms for state schools and government bodies.
- Summer Servicing: Bulk collection and refurbishment during academic holidays.
- Free Triage: No-obligation diagnostics for all education clients.
- Data Security: GDPR-compliant factory reset for smart projectors (Android/Google TV).
Hire & Rental
Dry Hire & Emergency AOG
"Clean Room" cycled rental fleet. We maintain our own stock of Barco UDX and Panasonic PT-RZ units to zero-defect standards for dry hire and emergency replacement.
View Rental InventoryThe "Clean Room" Difference
Unlike standard rental houses, every unit in our fleet is cycled through our ISO repair lab after every hire. Optics are chemically cleaned, laser banks are colour-balanced, and firmware is matched to your specific show requirements.
- Barco UDX-4K32: 30,000 Lumen 3-Chip DLP Laser.
- Panasonic PT-RZ21K: 20,000 Lumen Solid Shine.
Logistics & Support
- Dual-Hub Strategy: Equipment available from Doncaster (UK) or Dublin (EU) to avoid Carnets and customs friction.
- Hot-Shot Dispatch: Same-day emergency delivery for "show-down" situations.
- Lens Calibration: All lenses checked for focus drift and motor slip before dispatch.
- Flight Cased: Industry-standard shock-mount cases for secure transport.
Simulation & Training
Zero Latency Visuals
Precision engineering for Flight, Maritime, and ATC simulators. We support Barco F-Series, Sony VPL-GTZ, and JVC D-ILA platforms where geometry and contrast are critical.
Sim Repair CapabilitiesCritical Fault Resolution
- Geometry Drift: Repair of warping modules and pulse electronics to fix image distortion in blended arrays.
- NVG Compatibility: Calibration of IR light sources for Night Vision Goggle training scenarios.
- Contrast Loss: Replacement of oxidised Wire Grid Polarisers in LCoS/SXRD engines to restore black levels.
- Smearing: Diagnosis of high-G chassis vibration damage in motion platforms.
Platform Expertise
We provide component-level support for platforms that are often deemed "End of Service" by OEMs, keeping critical training infrastructure operational.
- Barco F70 / F90 / FL40
- Sony VPL-GTZ Series (SXRD)
- JVC VS2000 / VS4000 (D-ILA)
- Norxe & Digital Projection
Cinema & Venue
DCI Compliant Engineering
Specialist intervention for DCI Cinema (Barco Series 2/4, Christie Solaria) and Large Venue Laser systems. We repair secure media blocks (IMB) and light engines.
Cinema Support ServicesDCI Component Repair
- ICP & Enigma Boards: Board-level repair for signal processing faults and "Marriage" errors.
- Light Engine Refurbishment: 6-axis convergence alignment and DMD chip replacement for 3-Chip DLP.
- Liquid Cooling: Pump replacement and glycol loop flushing for Christie Boxer and Barco laser units.
- LPS / Ballast Repair: High-voltage ignition repair for Xenon power supplies.
Security & Maintenance
We handle the complex cryptographic requirements of Digital Cinema Initiatives (DCI) hardware, including Dallas battery replacements and certificate restoration.
- Barco Series 2 (DP2K) & Series 4 (SP4K)
- Christie Solaria (CP22xx / CP42xx)
- Sony SRX-R320 / R515
Technology Agnostic Expertise
Our engineers are cross-trained on all major projection technologies. We do not rely on automated diagnostic tools alone; we use oscilloscopes, thermal imaging, and schematic analysis to solve problems at the electron level.
Contact Engineering engineeringLaser Phosphor & RGB
Maintenance of static and rotating phosphor wheels, laser bank balancing, and white-point calibration. We repair driver boards for specific colour channels (Red/Green/Blue) to restore gamut accuracy without replacing the entire light source.
3-Chip DLP
The gold standard for cinema and rental. We perform precise 6-axis mechanical alignment of the prism block to eliminate colour fringing. We also replace individual DMD chips that have developed "stuck pixel" (white/black dot) faults.
LCoS & SXRD
Proprietary reflective technology used by Sony, JVC, and Canon. Common failures include contrast loss due to oxidised Wire Grid Polarisers. We replace these optical elements in a clean-room environment to restore deep black levels.
Xenon High Voltage
Legacy cinema support. Diagnosis of 30kV ignition pulses and Lamp Power Supply (LPS) ripple current. We ensure stable arc striking and prevent premature lamp failures caused by unstable ballast regulation.
map Dual-Hub Logistics
In a post-Brexit landscape, moving high-value technical assets across borders can be fraught with delays and tariffs. Wells Electronics operates fully staffed engineering hubs in both Doncaster (UK) and Dublin (Ireland).
- check_circle Frictionless Trade: EU clients ship to Dublin; UK clients ship to Doncaster. No ATA Carnets required.
- check_circle Secure Transport: We utilise custom flight cases and dedicated tech couriers to ensure your precision optics arrive aligned and calibrated.
recycling Circular Economy
Our core mission is to extend the life of electronics. By repairing at the component level, we prevent tonnes of e-waste from entering landfill every year. We offer a sustainable alternative to the "replace and dispose" culture.
- check_circle WEEE Compliance: Full audit trails for end-of-life disposal, including hazardous waste handling (lamps/mercury).
- check_circle Asset Recovery: We harvest viable donor parts from beyond-economical-repair units to keep legacy fleets operational.
Preventative Maintenance Protocols
Optical Cleaning
Deep ultrasonic cleaning of the optical path to remove micro-dust, restoring brightness and contrast.
Thermal Audit
Inspection of fans, sensors, and liquid cooling pumps. Replacement of dried thermal compound on DMD/Laser/Phosphor blocks.
Firmware & Alignment
Updating system firmware to latest stable versions and performing digital/mechanical convergence alignment.
Frequently Asked Questions
Do you offer trade accounts for education and enterprise?
Yes, we provide 30-day payment terms via Purchase Order (PO) for verified Schools, Universities, NHS Trusts, and Government bodies. Corporate trade accounts are also available subject to credit checks.
What projector brands do you repair?
We are technology agnostic but specialise in high-end platforms including Barco (Series 2/4/F-Series), Christie (Solaria/Boxer), Sony (SXRD), Panasonic (PT-RZ), Epson, and NEC. We are fully equipped for both Laser and Xenon architectures.
Do you provide emergency support?
Yes, we offer an expedited 'AOG' (Aircraft On Ground) style rapid response for critical failures in Cinema and Simulation environments. This includes out-of-hours triage and hot-shot logistics for immediate dispatch.
Where are your service hubs located?
We operate ISO 9001 certified engineering laboratories in Doncaster (UK) for Great Britain and Dublin (Ireland) for EU customers. This dual-hub strategy ensures frictionless trade and avoids customs delays.
Ready to Optimise Your Visual Assets?
Whether you need to revive a single cinema projector or manage a university-wide maintenance contract, our engineers are ready to deploy.
UK: +44 333 006 4327 | Ireland: +353 1 582 7344